Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> F 150 2WD V8-4.6L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

Wheel Speed Sensor - Front, Rear Wheel Drive (RWD)

Wheel Speed Sensor - Front, Rear Wheel Drive (RWD):





Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.

2. NOTE: The harness connector is located in the engine compartment secured to the fender apron.

Disconnect the wheel speed sensor electrical connector.
3. Disconnect the 2 wheel speed sensor harness retainers from the brake hose.
4. Remove the wheel speed sensor harness from the pushpin retainer.
5. Remove the bolt and the wheel speed sensor.
^ To install, tighten to 8 Nm (71 lb-in).
6. To install, reverse the removal procedure.
pro multis · About Operation CHARM