Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> F 150 2WD V8-4.6L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair

IGNITION COIL-ON-PLUG







Exploded View

Removal and Installation
1. Disconnect the ignition coil electrical connector.
2. Remove the ignition coil retaining bolt.
- To install, tighten to 10 Nm (89 lb-in).

3. Use a twisting motion while pulling up on the ignition coil and remove.

4. NOTE: Verify that the ignition coil spring is correctly located inside the ignition coil boot and that there is no damage to the tip of the boot.

To install, reverse the removal procedure.
- Apply dielectric compound to the inside of the coil boots prior to installation.
pro multis · About Operation CHARM