Front Fender: Service and Repair

FENDER

Exploded View







Material

Material:

Removal and Installation

Both fenders
1. If equipped, remove the wheelhouse lip moulding.
2. Remove the headlamp assembly.

RH fender
3. Remove the antenna cable.

Both fenders
4. Remove the fender splash shield.
5. Remove the front bumper cover-to-fender bolts.
6. Remove the front bumper cover pin-type retainer.
7. Remove the lower A-pillar fender bolts.
- To install, tighten to 12 Nm (9 lb-ft).

8. Remove the lower fender bolts.
- To install, tighten to 11 Nm (8 lb-ft).

9. Remove the top fender bolts.
- To install, tighten to 9 Nm (80 lb-in).

10. Remove the magform screw.
- To install, tighten to 14 Nm (10 lb-ft).

11. Remove the fender.
12. To install, reverse the removal procedure.