Adjustable Pedal Memory Programming

Adjustable Pedal Memory Programming

1. NOTE: To program the remote keyless entry (RKE) transmitter, refer to Locks.

Move the pedals to the preferred position using the adjustable pedal switch.

2. NOTE: Once the memory SET switch is pressed, there is a 5-second time limit to input a memory position. If a memory position input is not received within the time limit, the operation is aborted and the memory SET switch LED is turned OFF.

NOTE: If one of the following other inputs is received during the time limit, the operation is aborted and the memory SET switch LED is turned OFF:
^ Adjustable pedal switch
^ Power driver seat switch
^ Exterior mirror control switch
^ Memory SET switch

Press the memory SET switch, activating the memory SET switch LED.
3. Within 5 seconds (before the LED goes out) select memory position 1 or 2.