Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> F 450 4WD Super Duty V10-6.8L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)


Special Tool(s):






Special Tool(s)







Removal and Installation

1. NOTE: Refer to the Computers and Control Systems for correct vehicle communication module (VCM) hook-up procedure.

If servicing the powertrain control module (PCM), connect the scan tool to the vehicle. Allow the scan tool to identify the vehicle and obtain configuration data.
- All programmable module information will automatically be retrieved by the VCM.

2. Disconnect the 3 powertrain control module (PCM) electrical connectors.
3. Remove the 2 nuts and position the PCM wiring harness support bracket aside.
- To install, tighten to 7 Nm (62 lb-in).

4. Remove the PCM.
5. To install, reverse the removal procedure.
pro multis · About Operation CHARM