System Specifications

Timing Chain Hydraulic Tensioner Bolts 25 Nm (18 ft. lbs.)

Crankshaft Pulley Bolt
Install a new crankshaft pulley bolt
First pass 90 Nm (66 lb-ft).
Second pass Loosen 360°
Third pass 50 Nm (37 lb-ft).
Final pass Tighten an additional 90°

Engine Front Cover Upper Fasteners











First pass: Fasteners 1 through 15 25 Nm (18 lb-ft).
Final pass: Fasteners 6 and 7 48 Nm (35 lb-ft).

Engine Front Cover Lower Fasteners





First pass Loosely install bolts
Second pass 20 Nm (15 lb-ft).
Final pass Tighten an additional 60°