Headliner: Service and Repair

HEADLINER







Removal and Installation
1. Remove the driver seat and rear seat cushion.
2. Position the passenger seat fully rearward and recline fully.
3. Open the 4 passenger assist handle covers.
- Remove the bolts and remove the handles.
- To install, tighten to 5 Nm (44 lb-in).







4. Remove the A-pillar trim panels.
5. Disconnect the wire harness connector and the 2 pushpins.







6. If equipped, disconnect the automatic dimming rear view mirror electrical connectors.







7. Remove the B-pillar trim panels.
8. Remove the C-pillar trim panels.
9. Remove the overhead console.
- Disconnect the electrical connector.

10. Remove the sun visors and the sun visor clips.
- If equipped, disconnect the electrical connectors.

11. Remove the 2 headliner pushpin retainers at the rear.
12. If equipped, position the headliner forward to gain access to disconnect the roof opening panel motor electrical connector.

13. CAUTION: To avoid bending or crimping the headliner, an assistant is required for this step.

Remove the headliner through the LH rear door.

14. To install, reverse the removal procedure.