Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Mustang V6-4.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Brake Caliper Anchor Plate, Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Caliper Anchor Plate, Front

Brake Caliper Anchor Plate - 4.0L SOHC and 4.6L (3V)

Disc Brake System - Exploded View 4.0L SOHC And 4.6L (3V) (Part 1):




Disc Brake System - Exploded View 4.0L SOHC And 4.6L (3V) (Part 2):








Removal and Installation
1. Remove the brake pads.

2. NOTE: Clean any residual Threadlock(R) compound from the anchor plate threads before installing the bolts.

Remove and discard the 2 anchor plate bolts and remove the brake caliper anchor plate.
^ To install, tighten new anchor plate bolts to 115 Nm (85 lb-ft).
3. Inspect the brake caliper anchor plate assembly.
^ Check the guide pins and boots for binding and damage.
^ Replace worn or damaged pins. Lubricate the pins with the specified grease.
^ Install a new brake caliper anchor plate if it is worn or damaged.
4. To install, reverse the removal procedure.
pro multis · About Operation CHARM