Crankshaft, Engine
CrankshaftMain bearing journal
Diameter 67.481-67.505 mm (2.6567-2.6576 in)
Maximum taper 0.004 mm (0.0002 in)
Maximum out-of-round 0.0075 mm (0.0003 in) between cross sections
Clearance-to-cylinder block 0.048-0.024 mm (0.0019-0.0009 in)
Connecting rod journal
Diameter 53.003-52.983 mm (2.0867-2.0859 in)
Maximum taper 0.004 mm (0.0002 in)
Maximum out-of-round 0.0075 mm (0.0003 in) between cross sections
Maximum end play 0.075-0.377 mm (0.0030-0.0148 in)
Vertical Main Bearing Cap Fasteners
Discard the vertical cap fasteners.
First pass: Fasteners 1 through 20 10 Nm (89 lb-in).
Second pass: Fasteners 1 through 10 25 Nm (18 lb-ft).
Third pass: Fasteners 11 through 20 40 Nm (30 lb-ft).
Final pass: Fasteners 1 through 20 Tighten an additional 90°
Cross-Mounted Main Bearing Cap Fasteners
Discard the cross-mounted cap fasteners.
First pass 40 Nm (30 lb-ft).
Final pass Tighten an additional 90°
Crankshaft Main Bearing Codes
