Parking Brake Control: Service and Repair

Parking Brake Control

Parking Brake - Exploded View (Part 1):

Parking Brake - Exploded View (Part 2):

Parking Brake Control:

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Release the tension on the parking brake cable.
3. Remove the smart junction box (SJB) and bracket.
4. Disconnect the parking brake switch electrical connector.
5. Remove the nut and 2 bolts from the parking brake control.
^ To install, tighten to 30 Nm (22 lb-ft).
6. Position the carpet aside and position the cable conduit grommet through the floor.
7. Remove the parking brake control from the vehicle.
8. To install, reverse the removal procedure.
^ Inspect the parking brake system for correct operation.