Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Taurus FWD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Evaporative Emission Control Canister >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporative Emission Control Canister: Service and Repair

EVAPORATIVE EMISSION CANISTER

Exploded View


Part 1:






Part 2:






Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.

2. NOTE: Clean the evaporative emission (EVAP) canister vent solenoid electrical connector and the immediate surrounding area of any dirt or foreign material.

Disconnect the EVAP canister vent solenoid electrical connector.

3. Disconnect the fuel vapor tube-to-EVAP canister quick connect coupling.
4. Disconnect the fuel vapor tube assembly-to-EVAP canister quick connect coupling.
5. Disconnect the fresh air tube-to-dust separator.
6. Remove the 4 EVAP canister nuts.
- To install, tighten to 9 Nm (80 lb-in).

7. Remove the rivet and the EVAP canister.
8. To install, reverse the removal procedure.
- Carry out the Evaporative Emission System Leak Test. Testing and Inspection
- Carry out the evaporative emission repair verification drive cycle.
pro multis · About Operation CHARM