Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test AA: Powertrain Control Module (PCM) Read Only Memory (ROM) Failure

PINPOINT TEST AA: POWERTRAIN CONTROL MODULE (PCM) READ ONLY MEMORY (ROM) FAILURE


Flow Chart:






This pinpoint test is intended to diagnose the following:
- incorrect PCM calibration
- PCM

---------------------------------------------
AA1 : DIAGNOSTIC TROUBLE CODE (DTC) P0605

- DTC P0605 is set when a ROM concern is detected in the PCM
- Ignition ON, engine OFF.
- Carry out the KOEO self-test. Quick Test Description
- Is DTC P0605 present?






--------------------------------------------
AA2 : FLASH THE PCM

- Flash the PCM. REFER to Diagnostic Methods, Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming the VID Block for a Replacement PCM. Programming and Relearning
- Clear the DTCs.
- Carry out the KOEO self-test. Quick Test Description
- Is DTC P0605 present?






------------------------------------------
AA3 : CHECK FOR CORRECT PCM OPERATION

- Disconnect all the PCM connectors.
- Visually inspect for:
- pushed out pins
- corrosion
- Connect all the PCM connectors and make sure they seat correctly.
- Carry out the PCM self-test and verify the concern is still present.
- Is the concern still present?