Seat Cushion Thermo-Electric Device

Seat Cushion Thermo-Electric Device

Removal and Installation

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.

NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

NOTE: The cushion Thermo-Electric Device (TED) filter is detachable from the TED assembly housing from underneath the seat cushion.

1. Remove the front seat cushion. For additional information, refer to Seat Cushion - Front Front Seats.

2. Release the cushion trim cover retainers from the cushion frame and remove the cushion trim cover and cushion foam pad.

3. Remove the 3 cushion TED-to-cushion frame screws.

4. Remove the cushion TED-to-climate control seat cushion adapter screw and remove the TED.

5. To install, reverse the removal procedure.
- For correct front passenger seat cushion wire harness routing, refer to Seat Wire Harness Routing - Front Passenger Cushion Seat Wire Harness Routing - Front Passenger Cushion.