7500 MI or 12000 KM

Adjust
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
Inspect
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      If using Special Operating Conditions O, inspect and lubricate as needed, (if equipped with zerk fittings).
Replace
    Oil Filter, Engine
      If not using Special Operating Conditions T, I, D, O or E.
    Engine Oil
      If not using Special Operating Conditions T, I, D, O or E.
Rotate
    Tires
      Rotate tires, inspect tires for wear and measure tread depth if not using Special Operating Conditions T, I, D, O or E. (Vehicles with dual rear wheels should only rotate if unusual wear is noted.