Fender Splash Shield

Fender Splash Shield

Removal and Installation

Both shields

1. If equipped, remove the wheelhouse lip moulding and set the moulding aside.

LH splash shield

2. Open the hood and remove the 5 wiring harness pushpins attached to the splash shield in the engine compartment.

3. Remove the 3 splash shield pushpins and the 5 splash shield screws.

4. Partially lower the splash shield and remove the 2 air box deflector pushpins from the engine side of the splash shield.

RH splash shield

5. Remove the 4 wiring harness pushpins attached to the splash shield in the engine compartment.

6. Remove the 3 splash shield pushpins and the 5 splash shield screws.

Both splash shields

7. Remove the splash shield.

8. To install, reverse the removal procedure.