Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> F 250 2WD Super Duty V8-5.4L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Ignition Switch Lock Cylinder >> Service and Repair >> Ignition Lock Cylinder - Functional
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Lock Cylinder - Functional




Ignition Lock Cylinder - Functional









Removal and Installation

1. Remove the 3 screws and the lower steering column shroud.

2. Remove the Passive Anti-Theft System (PATS) transceiver (if equipped).

3. Remove the ignition lock cylinder.

1. Insert the ignition key and turn to the RUN position.

2. Using a suitable tool, press the ignition lock cylinder release pin through the access hole while pulling out the ignition lock cylinder.





4. For vehicles equipped with PATS, if a new lock cylinder with keys is replaced, the new PATS keys must be programmed. For additional information, refer to Key Programming Using Diagnostic Equipment in Antitheft and Alarm Systems. Using Diagnostic Equipment

5. To install, reverse the removal procedure.
- Verify ignition lock cylinder operation.

pro multis · About Operation CHARM