Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Backrest - Third Row




Seat Backrest - Third Row

Removal and Installation

NOTE: To remove the RH third row seat backrest, the LH seat outboard pivot cover must be removed before the RH seat outboard pivot cover can be removed.

LH or RH backrest

1. Pry to release the clips and remove the LH seat outboard pivot cover.

RH backrest

2. Pry to release the clips and remove the RH seat outboard pivot cover.

LH or RH backrest

3. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.

4. Remove the pivot bolt.
- To install, tighten to 22 Nm (16 lb-ft).

5. Roll the backrest trim cover up, remove the 2 backrest latch-to-backrest frame bolts and remove the backrest frame.
- To install, tighten to 45 Nm (33 lb-ft).

6. To install, reverse the removal procedure.