Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Edge AWD V6-3.5L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Rear Disc Brake >> Brake Caliper Anchor Plate
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Caliper Anchor Plate




Brake Caliper Anchor Plate









Removal and Installation

1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.

2. NOTICE: Do not pry in the caliper sight hole to retract the pistons, as this can damage the pistons and boots.

NOTICE: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.

Remove the 2 brake caliper guide pin bolts and position the caliper aside.

- Support the caliper using mechanic's wire.

- To install, tighten to 26 Nm (19 lb-ft).

3. Remove the 2 brake pads, shims and slide clips.

4. Remove the 2 brake caliper anchor plate bolts and the anchor plate.
- To install, tighten to 90 Nm (66 lb-ft).

5. NOTE: Make sure that the brake caliper hose is not twisted during caliper installation.

To install, reverse the removal procedure.

- Apply brakes several times to verify correct brake operation.

pro multis · About Operation CHARM