Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Mustang V8-5.4L SC >> Repair and Diagnosis >> Accessories and Optional Equipment >> Entertainment Systems >> Entertainment System Control Panel >> Service and Repair >> Front Display Interface Module (FDIM)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Display Interface Module (FDIM)




Front Display Interface Module (FDIM)

NOTE: With navigation shown, without navigation similar.











Removal and Installation

1. NOTE: Module configuration is required when a new Front Display Interface Module (FDIM) is being installed.

Upload the FDIM configuration information to the scan tool. For additional information, refer to Information Bus to carry out Programmable Module Installation (PMI). Programming and Relearning

2. Remove the center instrument panel finish panel. For additional information, refer to the Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. Remove the 4 screws and the FDIM.
- Disconnect the electrical connector.

4. To install, reverse the removal procedure.
- Download the configuration information to the FDIM. For additional information, refer to Information Bus to carry out PMI. Programming and Relearning

pro multis · About Operation CHARM