Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Mustang V8-5.4L SC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair




Crankshaft Position (CKP) Sensor - 5.4L (4V)









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the Supercharger (SC) belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.

3. Detach the wiring harness retainers from the A/C compressor stud bolts.

4. Disconnect the A/C compressor field coil and the Crankshaft Position (CKP) sensor electrical connectors.

5. Remove the 3 studbolts and position the A/C compressor aside.
- To install, tighten to 25 Nm (18 lb-ft).

6. Remove the CKP sensor bolt and sensor.
- To install, tighten to 10 Nm (89 lb-in).

7. To install, reverse the removal procedure.

pro multis · About Operation CHARM