Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Mustang V8-5.4L SC >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Seat Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Position Sensor: Service and Repair




Seat Position Sensor

NOTE: Driver seat shown, passenger seat similar (if equipped).











1. Remove the affected front seat. For additional information, refer to the Removal and Installation portion of Seats.

2. Disconnect the seat position sensor electrical connector.

3. WARNING: Always tighten the seat position sensor retaining bolt to specified torque. Failure to do so may result in incorrect restraint system operation, which increases the risk of personal injury or death in a crash.

Remove the bolt and seat position sensor.
- To install, tighten to 6 Nm (53 lb-in).

4. To install, reverse the removal procedure.

5. Install the front seat. For additional information, refer to the Removal and Installation portion of Seats.

pro multis · About Operation CHARM