Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Taurus AWD V6-3.5L Turbo >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Positive Crankcase Ventilation >> PCV Heater >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

PCV Heater: Service and Repair




Positive Crankcase Ventilation (PCV) Heater Element - 3.5L GTDI













Removal and Installation

1. Disconnect the PCV heater element electrical connector.

2. Disconnect the crankcase ventilation tube-to-PCV heater element quick connect coupling. For additional information, refer to Fuel Delivery and Air Induction.

3. Remove the 2 PCV heater element bolts.
- To install, tighten to 6 Nm (53 lb-in).

4. Remove the PCV heater element from the intake manifold.

5. NOTE: To install, apply clean engine oil to the O-ring seal.

NOTE: When installing, make sure the PCV valve heater element electrical connector is in the correct position to allow the wiring harness to be connected.

To install, reverse the removal procedure.

pro multis · About Operation CHARM