Remote Control: Service and Repair

Steering Wheel Controls









Removal and Installation

1. Remove the driver air bag module. For additional information, refer to Restraint Systems.

2. Disconnect the steering wheel controls electrical connector.

3. Remove the 4 screws and the steering wheel bezel box.

4. Remove the 4 screws and separate the steering wheel bezel box from the steering wheel controls bezel.
- Release the top 2 clips first, then the bottom 2 clips.

5. Remove the 2 screws, release the tabs, and separate the steering wheel controls from the bezel.

6. To install, reverse the removal procedure.