Heated Seat Module - Front

Heated Seat Module - Front

Removal and Installation

NOTE: For component identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment.
Turn the ignition OFF and wait at least one minute.

2. From under the front passenger seat, remove the heated seat module in the following sequence.

1. Remove the screw.

2. Tip the heated seat module and slide the retainers out of the cushion frame bracket.

3. Disconnect the electrical connectors.

3. To install, reverse the removal procedure.