Heated Seat Module - Rear

Heated Seat Module - Rear

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Remove the rear seat cushion. For additional information, refer to Seat Cushion - Rear Seat Cushion - Rear.

2. At the right rear of the seat cushion, remove the hog rings necessary to access the heated seat module.

3. Remove the tie strap, disconnect the 2 electrical connectors and remove the heated seat module.





4. To install, reverse the removal procedure.

5. Carry out module auto-configuration:
- Start the vehicle and push the low button on either heated seat switch.

- Operate the heated seats, monitor the indicators and verify the system is operating correctly in high and low.