Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Taurus FWD V6-3.5L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Service and Repair >> Start/Stop Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Start/Stop Switch




Start/Stop Switch









Removal and Installation

1. Remove the floor console LH finish moulding in the following sequence:

1. Lift up the rear of the floor console finish moulding to release the retaining clips from the floor console.

2. Pull the floor console finish moulding toward the rear of the vehicle to release the retaining clips from the center instrument finish panel.

3. Disconnect the start/stop switch electrical connector.

2. Remove the 4 start/stop switch bezel screws and remove the start/stop switch.

3. To install, reverse the removal procedure.
- Make sure to align the retaining clips to the adjacent retaining clip holes.

pro multis · About Operation CHARM