Automatic Transmission/Transaxle: Adjustments

Selector Lever Cable Adjustment

1. Remove the Air Cleaner (ACL) and outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

2. Disconnect the selector lever cable end from the manual control lever.





3. Place the selector lever in DRIVE.





4. Place the manual control lever in DRIVE.

1. Rotate the manual control lever clockwise until it stops.

2. Rotate the manual control lever counterclockwise one detent.





5. Unlock the adjuster by sliding the locking tab over.





6. Slide the selector lever cable end forward or backward to align it with the manual control lever.





7. With the adjuster locking tab unlocked, connect the selector lever cable end to the manual control lever.





8. Slide the adjuster tab to the LOCK position.





9. Install the Air Cleaner (ACL) and outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

10. Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.