Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Transit Connect L4-2.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Relays and Modules - Accessories and Optional Equipment >> Communications Control Module >> Service and Repair >> Removal and Replacement >> Tool Link(TM) Reader
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Tool Link(TM) Reader




Tool Link(TM) Reader









Removal and Installation

1. Remove the in-dash computer. For additional information, refer to In-Dash Computer In-Dash Computer.

2. Locate and cut the power feed wire for the Tool Link(TM) reader.

3. Remove the LH screw from the connector box bracket and remove the Tool Link(TM) reader ground eyelet.

4. Remove the LH front and rear sill panels to access the Tool Link(TM) reader electrical harness.

5. Remove the 4 screws and the Tool Link(TM) reader.
- Disconnect the electrical connectors.

6. To install, reverse the removal procedure.

1. Route the new power/ground feed electrical harness along the LH sill panel to the connector box in the instrument panel.

2. Splice the power feed into the existing feed that was cut during the removal procedure.

3. Position the ground eyelet and install the LH connector box screw.

pro multis · About Operation CHARM