Quarter Trim Panel

Quarter Trim Panel

Removal and Installation

1. Open the rear door scuff plate trim panel access cover and remove the rear door scuff plate trim panel pin-type retainer.

2. Remove the rear door scuff plate trim panel.

3. Remove the liftgate scuff plate.





4. Position the liftgate opening weatherstrip aside.

5. If equipped, remove the cargo net hold-down.

6. NOTE: Insert a non-marring tool between the D-pillar trim panel and rear quarter trim panel to release the trim panel.

Remove the rear quarter trim panel.





7. NOTICE: To avoid damage to the quarter trim panel, remove any retaining clips from the body and attach them to the quarter trim panel before installing.

To install, reverse the removal procedure.