Resonator: Service and Repair

Intake Air Resonator

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the LF wheel and tire. For additional information, refer to Wheels and Tires Removal and Replacement.

3. Remove the 9 fasteners and position aside the LH fender splash shield.





4. Remove the bolt and the air intake resonator.
- To install, tighten to 8 Nm (71 lb-in).

5. NOTE: Make sure that the front rubber grommet is seated in the bracket.

To install, reverse the removal procedure.