Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Escape 4WD V6-3.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Cover Seal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cover Seal




Cover Seal













Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the intermediate shaft. For additional information, refer to Front Drive Halfshafts Intermediate Shaft.

3. Using the Bearing Cup Remover, the Extension from the Halfshaft Remover and a suitable slide hammer, remove and discard the deflector.





4. Remove the seal using the Slide Hammer and a dent puller inserted into the groove seal.





Installation

1. Using the Halfshaft Oil Seal Installer, Rear Axle Oil Seal Installer and Handle, install the cover seal.
- The seal is correctly installed if it is flush with the PTU case cover.





2. Using the Handle and PTO Driven Gear Oil Seal Installer, install the deflector.





3. Install the intermediate shaft. For additional information, refer to Front Drive Halfshafts Intermediate Shaft.

pro multis · About Operation CHARM