Compass Zone Adjustment - Without Message Center

Compass Zone Adjustment - Without Message Center

1. Determine which magnetic zone you are in for your geographic location.





2. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR SETUP MENU.

3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays HOLD RESET FOR SYSTEM CHECK.

4. Press and release the SELECT/RESET button to scroll through the system check displays until the message center displays COMPASS ZONE XX is displayed.

5. Press and hold the SELECT/RESET button for approximately 2 seconds to enter the compass zone adjustment mode.

6. NOTE: The zone selection increases with each subsequent button press with a range of zones from 1 to 15 scrolling back to the beginning.

Press and release the SELECT/RESET button until the desired zone number appears.

7. Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.