Camshaft Position Sensor: Service and Repair

Camshaft Position (CMP) Sensor













Removal and Installation

LH Camshaft Position (CMP) sensor

1. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering Air Cleaner Outlet Pipe.

All CMP sensors

2. Disconnect the Camshaft Position (CMP) sensor electrical connector.

3. Remove the bolt and the CMP sensor.
- To install, tighten to 10 Nm (89 lb-in).

- Lubricate the O-ring seal with clean engine oil prior to installation.

4. To install, reverse the removal procedure.