Fuel Pump Control Unit: Service and Repair

Fuel Pump Control Module

Exploded View











Removal

1. Remove the RH (Right Hand) C-pillar trim panel REFER to C-Pillar Trim Panel - With Inflatable Safety Belts C-Pillar Trim Panel - With Inflatable Safety Belts or REFER to C-Pillar Trim Panel - Without Inflatable Safety Belts C-Pillar Trim Panel - Without Inflatable Safety Belts.

2. Disconnect the FP (Fuel Pump) control module electrical connector.

3. Remove the 2 FP (Fuel Pump) control module retaining nuts.

4. Remove the FP (Fuel Pump) control module.

Installation

1. Install the FP (Fuel Pump) control module.

2. Install the 2 FP (Fuel Pump) control module retaining nuts.
- Tighten to 6 Nm (53 lb-in).

3. Connect the FP (Fuel Pump) control module electrical connector.

4. Install the RH (Right Hand) C-pillar trim panel REFER to C-Pillar Trim Panel - With Inflatable Safety Belts C-Pillar Trim Panel - With Inflatable Safety Belts or REFER to C-Pillar Trim Panel - Without Inflatable Safety Belts C-Pillar Trim Panel - Without Inflatable Safety Belts.