Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> F 150 2WD V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor - Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor - Front




Wheel Speed Sensor - Front









Removal and Installation

1. Remove the brake disc. For additional information, refer to Front Disc Brake Brake Disc.

2. NOTE: The wheel speed sensor harness electrical connector is located in the engine compartment secured to the fender apron.

Disconnect the wheel speed sensor electrical connector.

3. Detach the 2 wheel speed sensor harness pushpin retainers.

4. Detach the wheel speed sensor harness retainer from the brake hose.

5. Remove the wheel speed sensor harness bolt.
- To install, tighten to 12 Nm (106 lb-in).

6. Remove the wheel speed sensor bolt and the wheel speed sensor.
- To install, tighten to 17 Nm (150 lb-in).

7. To install, reverse the removal procedure.

pro multis · About Operation CHARM