Seat Latch - Rear, SuperCab

Seat Latch - Rear, SuperCab

Removal and Installation

NOTE: 40 percent and 60 percent rear seat cushion latches are removed in the same manor.

NOTE: For parts identification and location, refer to Seat - Exploded View, Rear, SuperCab Seat - Exploded View, Rear, SuperCab.

1. Remove the rear seat. For additional information, refer to Seat - Rear, SuperCab Seat - Rear, SuperCab.

2. Remove the cushion pivot bolt.
- To install, tighten to 33 Nm (24 lb-ft).

3. Remove the rear screw from the outboard riser.
- Separate the cushion from the inboard riser to avoid pivot bushing damage.

- To install, tighten to 6 Nm (53 lb-in).

4. Remove the rear latch bolt and outboard seat riser.
- To install, tighten to 24 Nm (18 lb-ft).

5. Remove the screw and latch bolt cover.

6. Remove the front latch bolt and cushion latch.
- To install, tighten to 32 Nm (24 lb-ft).

7. To install, reverse the removal procedure.