Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> F 450 2WD Super Duty V8-6.7L DSL Turbo >> Repair and Diagnosis >> Diagrams >> Exploded Views >> Computers and Control Systems >> Crankshaft Position Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor




Engine Control Components - Exploded View





Crankshaft Position (CKP) Sensor

NOTE: The red locking tab on the Crankshaft Position (CKP) sensor electrical connector must be released prior to disconnecting the CKP sensor. Engage the red locking tab after connecting the CKP sensor electrical connector.

NOTE: Lubricate the Crankshaft Position (CKP) sensor O-ring seal with clean engine oil prior to installation.









Removal and Installation

NOTICE: Do not use silicone based sprays or lubricants on any components installed onto or around the diesel exhaust system or intake air distribution and filtering system. Silicone reacts with the Nitrogen Oxides (NOx) sensor and may cause permanent damage to the NOx sensor.

NOTICE: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls or damage to the vehicle may occur.

1. Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.

pro multis · About Operation CHARM