Generator - Single Generator

Generator - 6.7L Diesel, Single Generator









Removal and Installation

1. Disconnect the batteries. For additional information, refer to Battery, Mounting and Cables Battery Disconnect / Connect.

2. Remove the Charge Air Cooler (CAC) inlet tube. Intake Air Distribution and Filtering Diagrams.

3. Remove the Charge Air Cooler (CAC) outlet tube. Intake Air Distribution and Filtering Diagrams.

4. Rotate the accessory drive belt tensioner clockwise and remove the drive belt from the generator pulley.

5. Remove the nut and position the generator B+ terminal aside.
- To install, tighten to 17 Nm (150 lb-in).

6. Disconnect the generator electrical connector.

7. Remove the 2 generator bolts and the generator.
- To install, tighten to 47 Nm (35 lb-ft).

8. To install, reverse the removal procedure.