Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair




Powertrain Control Module (PCM)









Removal

1. NOTE: PCM installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the Passive Anti-Theft System (PATS).

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to Module Configuration Programmable Module Installation (PMI).

2. Remove the bolt and the PCM cover.

3. Disconnect the 3 PCM electrical connectors.

4. Remove the bolt and the PCM.

Installation

1. NOTICE: The PCM and PCM cover can be easily damaged by excessive fastener torque. Do not exceed 5.4 Nm (47.8 lb-in).

Position the PCM and install the bolt.

- Tighten to 5.4 Nm (47.8 lb-in).

2. Connect the 3 PCM electrical connectors.

3. NOTICE: The PCM and PCM cover can be easily damaged by excessive fastener torque. Do not exceed 5.4 Nm (47.8 lb-in).

Position the PCM cover and install the bolt.

- Tighten to 5.4 Nm (47.8 lb-in).

4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to Module Configuration Programmable Module Installation (PMI).

5. Reprogram the PATS. Carry out the Parameter Reset procedure. For additional information, refer to Anti-Theft - Passive Anti-Theft System (PATS) Key Programming.

pro multis · About Operation CHARM