Outer Input Shaft Case Seal

Outer Input Shaft Case Seal





Removal

1. Remove the clutch engagement system. For additional information, refer to Clutch Engagement System Clutch Engagement System.

2. Remove the guide tube bolts.





3. Remove the guide tube.





4. Using the special tools, remove and discard the outer input shaft case seal.





Installation

1. Using the special tools, install the new outer input shaft case seal.





2. Using the locating tab on the guide tube, install the guide tube.





3. NOTE: The guide tube bolts must not project beyond the mounting surface of the clutch engagement levers.

Install the guide tube bolts.

- Tighten to 8 Nm (71 lb-in).





4. Install the clutch engagement system. For additional information, refer to Clutch Engagement System Clutch Engagement System.

5. Install the clutch. For additional information, refer to Clutch Clutch.

6. Install the transaxle into the vehicle. For additional information, refer to Transaxle Transaxle.