Refrigerator Control Unit Relay: Service and Repair

Refrigerator Module

1. Remove the rear floor console refrigerator. For additional information, refer to Refrigerator Refrigerator.

2. NOTICE: Do not bend the condenser tubes. The screw driver must fit between the condenser tubes or damage may occur to the refrigerator.

Using a long thin screw driver, remove the phillips screw from the refrigerator module mounting bracket.





3. Disconnect the upper electrical connector from the refrigerator module.





4. Rotate the refrigerator module to the right and remove from the mounting bracket.





5. Disconnect the lower electrical connector from the refrigerator module.





6. Disconnect the refrigerator module-to-refrigerator electrical connector.





7. To install, reverse the removal procedure.