Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Flex FWD V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Trunk / Liftgate Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trunk / Liftgate Position Sensor: Service and Repair




Pinch Strip Switch

NOTE: Left side shown, right side similar.











Removal and Installation

1. Remove the liftgate trim panel. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

2. Disconnect the pinch strip electrical connector.





3. Remove the pinch strip.
- Remove the pin-type retainers.

- Remove the grommet and route the harness out of the vehicle.





4. To install, reverse the removal procedure.

pro multis · About Operation CHARM