Front Door: Service and Repair

Door

NOTE: Front door shown, rear door similar.











Removal and Installation

1. Remove the door check arm-to-body bolt.
- To install, tighten to 23 Nm (17 lb-ft).

2. NOTICE: To minimize the possibility of cross threading, hand start all fasteners during the installation.

NOTICE: To avoid damaging the door, this step requires an assistant.

Mark the position of each hinge and remove the upper and lower hinge-to-door bolts.

- To install, tighten to 48 Nm (35 lb-ft).

3. Remove the front door.

4. To install, reverse removal procedure.
- If necessary, align the door. For additional information, refer to Door Alignment - Front Door Alignment - Front or Door Alignment - Rear Adjustments.