Variable Valve Timing Actuator: Diagrams

Engine Control Components - Exploded View, 5.0L (4V)










Variable Camshaft Timing (VCT) Variable Force Solenoid

NOTICE: The Variable Camshaft Timing (VCT) variable force solenoid pins must be fully depressed to avoid interference with the VCT valve tips during installation. Failure to follow these instructions can result in damage to the engine.

NOTE: LH shown, RH similar.

NOTE: It is necessary to remove the valve cover to perform this procedure. For additional information, refer to Engine - 5.0L (4V) Service and Repair.

NOTE: To install, tighten bolts to 8 Nm (71 lb-in) plus an additional 30 degrees.











1. Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.