Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Mustang V8-5.0L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Throttle Body >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Body: Service and Repair




Throttle Body









Removal and Installation

1. If equipped, remove the 4 nuts and the strut tower cross brace.
- To install, tighten to 35 Nm (26 lb-ft).





2. NOTE: The engine appearance cover rubber grommets may remain on the cover. If so, remove the grommets from the cover and install them on the intake manifold before installing the cover.

Remove the engine appearance cover.





3. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Intake Air Distribution and Filtering Diagrams.

4. Disconnect the electronic throttle control electrical connector.

5. Remove the 4 bolts and the Throttle Body (TB)
- Discard the gasket.

- To install, tighten to 10 Nm (89 lb-in) plus an additional 45 degrees.

6. NOTE: Install a new TB gasket.

To install, reverse the removal procedure.

pro multis · About Operation CHARM