Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Mustang V8-5.4L SC >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Caliper >> Service and Repair >> Front Disc Brake >> Brake Caliper Anchor Plate
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Caliper Anchor Plate




Brake Caliper Anchor Plate





Removal and Installation

1. Remove the brake pads. For additional information, refer to Brake Pads - 2 Piston Brake Pads - 2 Piston.

2. NOTE: Using specified brake cleaner, clean any residual threadlock compound from the anchor plate threads before installing the bolts.

Remove and discard the 2 anchor plate bolts and remove the brake caliper anchor plate.

- To install, tighten new anchor plate bolts to 115 Nm (85 lb-ft).

3. Inspect the brake caliper anchor plate assembly.
- Check the guide pins and boots for binding and damage.

- Replace worn or damaged pins. Lubricate the pins with the specified grease.

- Install a new brake caliper anchor plate if it is worn or damaged.

4. To install, reverse the removal procedure.

pro multis · About Operation CHARM