Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Ranger 2WD L4-2.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor Ring - Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Speed Sensor Ring - Rear




Wheel Speed Sensor Ring - Rear





Removal

1. Remove the rear axle shaft. For additional information, refer to Rear Drive Axle/Differentia Service and Repair.

2. Using the Pinion Bearing Cone Remover, remove the anti-lock brake sensor indicator from the axle shaft.





Installation

1. Using the Axle Bearing/Seal Plate and the Wheel Speed Sensor Ring Installer, align the rear anti-lock brake sensor indicator to the rear axle shaft.





2. Using the Axle Bearing/Seal Plate and the Wheel Speed Sensor Ring Installer, press the rear anti-lock brake sensor on the rear axle shaft to specification.





3. Install the rear axle shaft. For additional information, refer to Rear Drive Axle/Differential Service and Repair.

pro multis · About Operation CHARM