Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Ranger 2WD L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Disassembly and Assembly of Subassemblies >> Output Shaft Ring Gear and Hub Shaft Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Output Shaft Ring Gear and Hub Shaft Assembly




Output Shaft Ring Gear and Hub Shaft Assembly

Disassembly









1. Inspect the output shaft ring gear, output shaft hub, needle bearing (No. 10B) and needle bearing race (No. 10A) assembly for damage. If service is required, use the following procedure.

2. Remove the No. 10B needle bearing.





3. Remove the No. 10A needle bearing race assembly.





4. Remove the output shaft hub from the output shaft ring gear.

1. Remove the retaining ring.

2. Remove the output shaft hub.





Assembly

1. Install the output shaft hub onto the output shaft ring gear.

1. Install the output shaft hub.

2. Install the retaining ring.





2. Install the No. 10A needle bearing race assembly.
- Snap the needle bearing race assembly onto the output shaft hub.





3. NOTE: Use petroleum jelly to hold the needle bearing to the output shaft ring gear and output shaft hub.

Install the No. 10B needle bearing onto output shaft ring gear and output shaft hub.





pro multis · About Operation CHARM