Procedures

Axle and Differential Draining and Filling





1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the fill plug.

3. Use the Oil Suction Gun and remove the axle lubricant through the fill opening.

4. If necessary, a cleaning solvent can be injected to remove any contaminants.

5. Repeat Step 3 to remove the cleaning solvent.

6. Fill the front axle with the correct type and quantity of lubricant. Refer to Specifications.

7. Install the fill plug.
- Tighten to 27 Nm (20 lb-ft).