Headlamp Switch: Service and Repair

Headlamp Switch









Removal and Installation

1. Remove the instrument panel side finish panel.

2. NOTE: The 3 retaining tabs on the headlamp switch bezel are located at approximately the 5, 8 and 12 o'clock positions when viewed from the front.

Reaching from behind, release the 3 tabs and push the headlamp switch and bezel through the opening.

- Disconnect the electrical connector.

3. NOTE: The 3 retaining tabs on the headlamp switch are located at approximately the 3, 7 and 11 o'clock positions when viewed from the front.

Release the 3 tabs and separate the headlamp switch from the bezel.

4. To install, reverse the removal procedure.